Kapton Film Temperature Limit
Kapton Film Temperature Limit. Better than most known films, it retains its resistance to radiation and dielectric properties through low and high temperature extremes. Kapton ® polymide (pi) withstands both high and low temperature extremes.
Kapton retains approximately 60% of its tensile strength at 200ºc, and 75% of its tensile strength at 100ºc. Kapton® polyimide films can be used in a variety of electrical and electronic uses: Max operating temp* 260°c 500°f.
Kapton® Tube Products Offer Superb Electrical, Physical, And Mechanical Insulation.
Hn film can be laminated, metallized, punched, formed or adhesive coated. The maximum operation temperature depends on many factors. 0.15 mm 0.006” 0.76 mm 0.030” 1.0 mm 0.040” dielectric strength.
Are More Durable Than Less Dense Polyimide Insulation Sheets, So They Can Stand Up To Machining.
Better than most known films, it retains its resistance to radiation and dielectric properties through low and high temperature extremes. They are not, however, good for machining. Kapton® polyimide films can be used in a variety of electrical and electronic uses:
For Splicing Wires, Masking Circuit Boards.
Can be used up to 400 °c for short periods (e.g. Exposure temperature and thickness, dupont™ kapton® hn and vn films The maxmimum width of polyimide / kapton heater is only limited by the incoming roll of polyimide film.
5 Rows Kapton ® Polyimide Film Is An Extremely Strong, Transparent (Amber) Film That Retains Its High.
Although there is no significant weight loss seen in kapton films exposed long term to 400ºc applications, there is a slow degradation of tensile strength when exposed to very high temperatures in the presence of air (oxygen). 260°c applys to aluminum plated polyimide heaters without adhesive backing. Kapton (type h) film is a laminate of polyimide and fep.
Henece There Is No Limit On One Dimension.
The main advantage of kapton® (link to article 1) is its temperature stability. Three types of kapton® are described in this bulletin: We can make wider heaters if the volume of demand is considerable.
Post a Comment for "Kapton Film Temperature Limit"